Intran Plus

Intran® Plus is the original transducer-tipped intrauterine pressure catheter (IUPC), providing accurate uterine contraction data, including reliable information about resting tones and peak contraction pressures throughout the rigors of labor and delivery.

Product Description
Models
Specifications
Labor & Delivery Brochure
One Avoidable Bad Outcome Is Too Many.

Intran Plus intrauterine pressure catheter (IUPC).As the inventor of transducer-tipped intrauterine pressure catheters, Utah Medical takes pride in our stringent product quality and performance standards assuring patient and clinician an IUPC which provides safe and easy insertion, trouble-free operation and state-of-the-art technology proven successful in over 5 million births.

Flexible re-zeroing capability, with re-zero Intran Plus is available in two catheter tip sizes.button on the catheter or on the re-usable cable.

Two catheter tip sizes.

Separate amnioinfusion lumen for simultaneous infusion and monitoring.

Amnio View Port option for quick and easy assessment of amniotic fluid.

Time-saving, easy to use catheters with no cumbersome setup.

Maintenance-free to provide uninterrupted pressure readings.

Contain no latex or latex by-products.

Intran Plus intrauterine pressure catheter with amnioinfusion lumen.Intran® Plus allows the clinician to change monitors and zero the system before or after catheter insertion, and was designed with a multi-purpose "amnio" port and lumen for both amnioinfusion and sampling.

The amnioinfusion lumen (see image right) allows a normal saline flow rate greater than 20ml per minute with gravity feed at 32" height, which will support either a bolus infusion until fetal heart decelerations abate, or a slower continuous infusion for prophylactic or therapeutic purposes.

The Intran® Plus catheter tubing is constructed of Sensaflex™ material that facilitates placement with or without the introducer. The blunt catheter tip, coupled with the optimal stiffness of the catheter tubing, allows clinicians to avoid insertion-related injuries. Also, because Intran® Plus is a single patient use device, the risk of cross contamination is eliminated.



Transducer-Tipped IUP Catheters
Model Number Description Unit of Measure Image
IUP-400 Intran® Plus Transducer-Tipped IUPC with Catheter Zero and Amniolumen. * 10/BOX
IUP-450 Intran® Plus Transducer-Tipped IUPC (small tip) with Catheter Zero and Amniolumen. * 10/BOX
IUP-500 Intran® Plus Transducer-Tipped IUPC with Catheter Zero, Meconium Viewport and Amniolumen. * 1 10/BOX
IUP-550 Intran® Plus Transducer-Tipped IUPC (small tip) with Catheter Zero, Meconium Viewport and Amniolumen. * 1 10/BOX
IUP-600 Intran® Plus Transducer-Tipped IUPC with Zero Switch on Reusable Cable and Amniolumen. * 10/BOX
IUP-650 Intran® Plus Transducer-Tipped IUPC (small tip) with Zero Switch on Reusable Cable and Amniolumen. * 10/BOX
IUP-700 Intran® Plus Transducer-Tipped IUPC with Meconium Viewport, Zero Switch on Reusable Cable and Amniolumen. * 1 10/BOX
IUP-750 Intran® Plus Transducer-Tipped IUPC (small tip) with Meconium Viewport, Zero Switch on Reusable Cable and Amniolumen. * 1 10/BOX
 
Fluid-Filled IUP Catheters
Model Number Description Unit of Measure Image
IUP-075 78 Inch Double Lumen Fluid-Filled IUPC w/Un-filled 20 cc Syringe. * 10/BOX
IUP-005 IUPC Mounting Pad with Strap. * 25/BOX  
 
Reusable Intrauterine Pressure Monitoring Interface Cables
Model Number Description Unit of Measure Image
650-205 Reusable Intrauterine Pressure Monitor Interface Cable for HP 8040A (5uv) / HP 50ix / Pegasus M1350A. * 1/EA
650-207 Reusable Intrauterine Pressure Monitor Interface Cable for HP 8030A (5uv). * 1/EA
650-229 Reusable Intrauterine Pressure Monitor Interface Cable for FetaScan 1000 (IBI). * 1/EA  
650-231 Reusable Intrauterine Pressure Monitor Interface Cable for Corometrics 115, 116, 118, 120 Series, 145, 150, 155, 170 Series, 250 Series, Telemetry 340, 556. * 1/EA
650-238 Reusable Intrauterine Pressure Monitor Interface Cable for Analogic FetalGard 2000. * 1/EA
650-240 Reusable Intrauterine Pressure Monitor Interface Cable for Philips Avalon FM30,
FM50. *		 1/EA
650-255 Reusable Intrauterine Pressure Monitor Interface Cable for HP 8040A (40uv) / HP 50ix / Pegasus M1350A. * 1/EA
650-263 Reusable Intrauterine Pressure Monitor Interface Cable for Space Labs FM660, FM670, IM76, IM77; FetaScan 1400, 1200. * 1/EA
650-605 Reusable Intrauterine Pressure Monitor Interface Cable with Zero Switch for HP 8040A (5uv) Pegasus M1350A. * 1/EA
650-631 Reusable Intrauterine Pressure Monitor Interface Cable with Zero Switch for Corometrics 115, 116, 118, 120 Series, 145, 150, 155, 170 Series, 250 Series, Telemetry 340, 556. * 1/EA
650-640 Reusable Intrauterine Pressure Monitor Interface Cable with Zero Switch for Philips Avalon FM30, FM50. * 1/EA
       
 

* Product is CE Marked
1 Patented Product, U.S. Patent # 5,713,351

Sensor Specifications
Transducer Type Silicon diaphragm
Operating Pressure Range -50 to +150mmHg
Sensitivity 5µV/V/mmHg
Non-Linearity and Hysteresis ± 2% of reading or ± 1mmHg, whichever is greater
Sensitivity Thermal Effect ± 0.1 %/° C
Zero Thermal Effect Max. ± 0.3mmHg/° C
Zero Drift With Time < or = 1.0 mmHg/8 hours after 10 minute warm up to body temperature
Leakage Current <10µ A @ 115 VAC rms
Overpressure Protection -400 to +1200mmHg
Operating Temperature 15° C to 40° C
Excitation Voltage and Frequency 2 to 10 VDC; or VAC rms to 5 kHz
 
Catheter Specifications
Catheter Diameter .14 inches
Catheter Length 32.5 inches
Regular Tip Dimensions .25" H x .30" W x 1.00" L
Small Tip Dimensions .19" H x .25" W x .90" L
Amnio Port/Lumen Specifications At a height of 32" the flow rate is greater than 20 ml per minute saline-minimum.
 

 

Portal Login | To Order | Contact Us | Disclaimer | Home | © 1999 - 2010 Utah Medical Products, Inc.